CGDI BMW Key Programmer Full Version with Total 24 Authorizations

CGDI BMW Key Programmer Full Version

Highlights of CGDI BMW Full Version:

1. High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 1.

2. Support All 24 Authorizations Free: CAS1-3+ Key Match, CAS4 Key Match, Normal Mode Read ISN, Bootstrapper upgrades, FEM / BDC Key Match, CAS3 Key Match, BMW F Series Program, BMW Enable / Disable Key, BMW F Series Coding, EGS Empty and Clone, CAS Mileage Reset, Porsche 987 / 911 key learning, 95128 / 95256 Read and Write, BMW E Series Program, BMW E Series Codification, Maserati Meter Mileage Adjustment, BMW EWS Key Match, BMW Data modification and verification, BMW Diagnosis, ICOM Function, B48 B58 read ISN, CAS4 Key Match(OBD), MSD80 / 81 / 85 / 87/ MSV80 / MSV90 read ISN and N13 / N20 / N55 / B38 Read / Write ISN.



3. Free Update Online, when you receive the device, please download software Here

4. Lifetime Free License, device won' t get expired, just renew license online for free when there is no day left.

5. Multi-Languages: English, Spanish, French and Chinese
If you need Italian, Polish or Turkish, please pay $130 to activate.

CGDI BMW MSV80 Read MSV80 Specification:

Method 1: Read directly ISN code in the car, pls be assure car voltage is 12V above, directly connect OBD to operate--time about 5mins.
Methods 2: Split engine computer (DME) to operate--connectline as follows:
MSV80 / D80 / D85 / wiring in the experimental bench.




How to Use CGDI BMW Programmer?

Run CGDI PROG BMW software after finish all connection
Go to FEM / BDC key match
The current FEM BDC needs update the ECU program before performing key matching. Please ensure that the car battery has enough power. The programming process, please keep the equipment cable connection
Please remove the FEM BDC and then use the programmer to read and save data from the 95XXX EEPROM chip on FEM BDC computer board
Read the original car EEPROM data file
The 95128 EEPROM chip
Wait for CGDI BMW reading chip data
Save data
Use the programmer to write the calculated new data to the 95XXX EEPROM chip , then put the FEM BDC back into the car
Write M95128
Check the FEM connection
Voltage test platform is on
Use the programmer to write the calculated new data to the 95XXX EEPROM chip , then put the FEM BDC back into the car
The ECU is being programmed…
Again, write M95128
Again, write M95128
Voltage test platform should be on
Please remove the FEM BDC and then use the CGDI programmer to write the original car EEPROM data back to 95XXX EEPROM chip and FEM BDC back into the car. Coding is successful! ! ! !

CGDI Prog BMW Customers Feedbacks:

cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem / bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
program bdc key via obd for bmw x6 ok!
add key to bmw x5 successfully
program key to 2016 BMW 5-series ok
program key for BMW 523Li OK
Program BMW FEM all key lost done!
program FEM for F30 328 2013 ok
programing orignal key for BMW 325 ok
add new key to BMW 3 series ok.
program bmw m3 key done!
Cas 2 - E60 2005 lost key - Obd - not working ( no option to program from dump)
Cas 3+ E87 2008 spare key - eeprom dump - ok
F10 - key from dump - OK
F10 LCI - key from dump and isn from working key - OK
F10 LCI - key from dump and isn from DDE - OK
E60 LCI - downgrade CAS3+ and key via OBD - OK

CGDI BMW Prog Reviews:

1. For making keys it has worked great. I have made about 7 keys so far all CAS types except CAS4.
2. I tried to read ISN on 3 cars and failed. I think it may only read ISN from MSV80 / 85 ecu' s. Will try on the MSV80 soon and will update. All done by OBD.
3. I have BMWExplorer and have used Autohex as well, but if you only need to program keys and your not concerned with ISN for DME swaps, I would buy the CGDI before those tools.
4. Its supposed to do ISN but the advertising wording can be misleading. It may only be able to read ISN of 2 types of DME. So far thats how its looking. Will contact my vendor to verify and see if there is an update preventing ISN reads.
5. For the money its worth it just to be able to program the CAS3 keys. It works super fast literally less than 2 minutes beginning to end. Faster than BMWExplorer for sure. I have yet to successfully do FEM key with Explorer so as far as Im concerned it has the same key programming capability as the CGDI.

CGDI BMW FAQs:

Question: on tool info it says supports bmw key unlock, does that mean I can reuse a old key and reprogram it? Also how safe if downgrading for cas3 + ? I only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Answer: Yes, CGDI BMW Key tool supports bmw key unlock, you can reuse an old key and reprogram it. and yes it is safe if downgrade for CAS3 + . Don' t worry you will mess things up.

CGDI BMW Package includes:

• 1pc x CGDI Prog BMW MSV80 Main Unit
• 1pc x USB Line
• 1pc x OBD Connection Line
• 1pc x Carton Box

---

We are here for you:

Email: Sales@CGDIprog.com
WhatsApp: +86-18205996549
Skype: Sales@CGDIprog.com